XMetaL Community Forums » General » General XMetaL Discussion » The Deliverable could not be created. If a file ... Adobe Distiller XMetaL 6.0
Pages: 1
« previous next »
Print
Author Topic: The Deliverable could not be created. If a file ... Adobe Distiller XMetaL 6.0  (Read 704 times)
twisted
Member

Posts: 15
« on: August 18, 2011, 05:44:52 PM »
Having problems generating a PDF output

Getting the following message:
"The deliverable could not be created. If a file with the same name is open in another application, close the file and then generate output again."

Configuration setup:
XMetaL 6.0
Adobe X
Windows XP SP3

Additional info:
Problem first started when Adobe distiller was not found, searched forum and added the following to configure outputs:
ANT_PARAM_args.distiller.exe  =  "C:\progra~1\adobe\acroba~1\acrobat\acrodist.exe"
DISTILLER_PARAM  =  -n -j "C:\Documents and Settings\All Users\Application Data\Adobe\Adobe PDF\Settings\standard.joboptions"

Any thoughts ideas ??


 
Logged
gcrews
Member

Posts: 189
« Reply #1 on: August 18, 2011, 06:25:50 PM »
close the pdf or generate to a local folder. make sure there are no handles open to any files in the output folder.
Logged
twisted
Member

Posts: 15
« Reply #2 on: August 19, 2011, 09:21:22 AM »
I rebooted, made sure nothing else was running, restarted XMetaL, open map, changed folder location and still getting the same error.  It will render a PDF using the XMetaL Enhance PDF via RenderX XEP but not with Acrobat Distiller.

When I go to the pdf_out folder I do find a topic.ps file that when I double-click to open launches the Acrobat Distiller and then creates the PDF.

What else can I try??

Here is the error log data

<log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set LOGFILE_DIR=C:\DOCUME~1\sgalaba\LOCALS~1\Temp\XMetaL\RENDIT~1\log </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set XMETAL_SHARED=C:\PROGRA~1\COMMON~1\XMETAL~1 </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set XMETAL_DITA_SDK_DIR=C:\PROGRA~1\COMMON~1\XMETAL~1\DITA_OT </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set XMETAL_DITA_SDK_DRIVE=C: </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set XMETAL_CUSTOM_FILES_FOLDER=C:\PROGRA~1\XMETAL~1.0\Author\DITA\XACs\shared\RENDIT~1\CUSTOM~1 </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set XMETAL_AUTHOR_FOLDER=C:\PROGRA~1\XMETAL~1.0\Author </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set XMETAL_RENDITIONS_FOLDER=C:\PROGRA~1\XMETAL~1.0\Author\DITA\XACs\shared\RENDIT~1 </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set FMPATH= </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set HELP_WORKSHOP_DIR=C:\Program Files\HTML Help Workshop </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set IEXPLORER_DIR= </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set DISTILLER_DIR="C:\Program Files\Adobe\Acrobat 10.0\Acrobat </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set ANT_HOME=C:\PROGRA~1\COMMON~1\XMETAL~1\apache-ant-1.6.5 </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set DITA_OT_DIR=C:\PROGRA~1\COMMON~1\XMETAL~1\DITA_OT </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set PATH=C:\Program Files\XMetaL 6.0\Author\;C:\Program Files\NVIDIA Corporation\PhysX\Common;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\cygwin\bin;C:\cygwin\usr\X11R6\bin;C:\Program Files\Subversion\bin;C:\Program Files\ATI Technologies\ATI.ACE\Core-Static;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\TortoiseSVN\bin;C:\PROGRA~1\COMMON~1\XMETAL~1\apache-ant-1.6.5\bin </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set JAVA_HOME=C:\PROGRA~1\COMMON~1\XMETAL~1\jre1.5.0 </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set CLASSPATH=C:\PROGRA~1\COMMON~1\XMETAL~1\DITA_OT\lib\avalon-framework-cvs-20020806.jar;C:\PROGRA~1\COMMON~1\XMETAL~1\DITA_OT\lib\batik.jar;C:\PROGRA~1\COMMON~1\XMETAL~1\DITA_OT\lib\dost.jar;C:\PROGRA~1\COMMON~1\XMETAL~1\DITA_OT\lib\fop.jar;C:\PROGRA~1\COMMON~1\XMETAL~1\DITA_OT\lib\icu4j.jar;C:\PROGRA~1\COMMON~1\XMETAL~1\DITA_OT\lib\resolver.jar;C:\PROGRA~1\COMMON~1\XMETAL~1\DITA_OT\lib\serializer.jar;C:\PROGRA~1\COMMON~1\XMETAL~1\DITA_OT\lib\xalan.jar;C:\PROGRA~1\COMMON~1\XMETAL~1\DITA_OT\lib\xercesImpl.jar;C:\PROGRA~1\COMMON~1\XMETAL~1\DITA_OT\lib\xml-apis.jar;C:\PROGRA~1\COMMON~1\XMETAL~1\DITA_OT\lib\xsltc.jar;C:\PROGRA~1\COMMON~1\XMETAL~1\DITA_OT\lib\xm_util.jar; </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set ANT_PARAM_dita.temp.dir=C:\PROGRA~1\COMMON~1\XMETAL~1\DITA_OT\temp </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set ANT_PARAM_dita.dir=C:\PROGRA~1\COMMON~1\XMETAL~1\DITA_OT </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;call "c:/docume~1/sgalaba/locals~1/temp/xmetal/renditions/log/xm_dita_envar.bat" </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;echo on </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set IN_FILE_DIR_BACK_SLASH=c:\documents and settings\sgalaba\my documents\xmetal\cub application notes </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set IN_FILE_DIR=c:/documents and settings/sgalaba/my documents/xmetal/cub application notes/ </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set IN_FILE_NAME_ONLY=WebBrowserCertificateInstallation_MAP001 </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set IN_ORIGINAL_FILE_NAME_ONLY=webbrowsercertificateinstallation_map001 </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set IN_FILE_EXT=.ditamap </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set OUT_FILE_DIR_BACK_SLASH=c:\documents and settings\sgalaba\my documents\xmetal\cub application notes\pdf_out </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set OUT_FILE_DIR=c:/documents and settings/sgalaba/my documents/xmetal/cub application notes/pdf_out/ </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set OUT_FILE_NAME_ONLY=webbrowsercertificateinstallation_map001 </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set OUT_FILE_EXT=.pdf </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set DITA_OT_DIR=C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set cmd_open_with=system_default </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set cmd_generated_file_extension=PDF </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set cmd_disable_xmetal_preprocessing=yes </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set cmd_xft_options_form=AddDlvTypePDFRX.xft </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set DSDK_PARAM_outdir=C:\Documents and Settings\sgalaba\My Documents\XMetaL\CUB Application Notes\pdf_out </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set cmd_log_succeeded_text=BUILD SUCCESSFUL </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set cmd_log_failed_text=BUILD FAILED </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set DSDK_PARAM_transtype=pdf3 </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set DSDK_PARAM_ditaext=xml </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set ANT_PARAM_generate.copy.outer="3" </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set DSDK_PARAM_indexshow=no </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set DSDK_PARAM_artlbl=no </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set DSDK_PARAM_draft=no </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set cmd_default_config_map=DITA142_FC327FA208BE43C4A906C1074EF636AA;C:\PROGRA~1\XMETAL~1.0\Author\DITA\XACs\shared\RENDIT~1\print_dita142.xml;DF3A31B538A74932B422E7F0BDAEB87F;C:\Documents and Settings\sgalaba\Application Data\SoftQuad\XMetaL\6.0\print_local.xml; ;C:\Documents and Settings\sgalaba\My Documents\XMetaL\CUB Application Notes\pdf_out\WebBrowserCertificateInstallation_MAP001.pdf;C:\Documents and Settings\sgalaba\My Documents\XMetaL\CUB Application Notes\WebBrowserCertificateInstallation_MAP001.ditamap; </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set cmd_default_config_topic=DITA142_FC327FA208BE43C4A906C1074EF636AA;C:\PROGRA~1\XMETAL~1.0\Author\DITA\XACs\shared\RENDIT~1\print_dita142.xml;DF3A31B538A74932B422E7F0BDAEB87F;C:\Documents and Settings\sgalaba\Application Data\SoftQuad\XMetaL\6.0\print_local.xml; ;C:\Documents and Settings\sgalaba\My Documents\XMetaL\CUB Application Notes\pdf_out\certificateinstallationprocedure_ts001.pdf;C:\Documents and Settings\sgalaba\My Documents\XMetaL\CUB Application Notes\CertificateInstallationProcedure_ts001.xml; </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set cmd_preview_config_topic=DITA142_1B9FF196523E459683C958FA9E31EEEE;C:\PROGRA~1\XMETAL~1.0\Author\DITA\XACs\shared\RENDIT~1\print_dita142.xml;0C41D0FDB1A24CE9B3FA702F1A85C0C5;C:\Documents and Settings\sgalaba\Application Data\SoftQuad\XMetaL\6.0\print_local.xml; ; ; ; </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set cmd_preview_config_map=DITA142_1B9FF196523E459683C958FA9E31EEEE;C:\PROGRA~1\XMETAL~1.0\Author\DITA\XACs\shared\RENDIT~1\print_dita142.xml;0C41D0FDB1A24CE9B3FA702F1A85C0C5;C:\Documents and Settings\sgalaba\Application Data\SoftQuad\XMetaL\6.0\print_local.xml; ; ; ; </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set cmd_extended_debug_info=no </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set cmd_always_open_log=no </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set ANT_OPTS="-Xmx256m" </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set cmd_fs_sandboxing=no </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set cmd_cms_sandboxing=yes </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set cmd_dita_before_14_compatible=no </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set cmd_dita_ot_per_user_version=1 </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set _rem_cmd_synchro_mode=2 </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set DSDK_PARAM_fooutputrellinks=no </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set cmd_disable_config=no </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set ANT_PARAM_args.distiller.exe="C:\progra~1\adobe\acroba~1\acrobat\acrodist.exe" </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set DISTILLER_PARAM=-n -j "C:\Documents and Settings\All Users\Application Data\Adobe\Adobe PDF\Settings\standard.joboptions" </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set DSDK_PARAM_logdir=C:\DOCUME~1\sgalaba\LOCALS~1\Temp\XMetaL\RENDIT~1\log </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set ANT_PARAM_args.logdir=C:\DOCUME~1\sgalaba\LOCALS~1\Temp\XMetaL\RENDIT~1\log </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set DITA_OT_SRC_DIR=C:\Program Files\Common Files\XMetaL Shared\DITA_OT </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set DSDK_PARAM_ALL= /outdir:"C:/Documents and Settings/sgalaba/My Documents/XMetaL/CUB Application Notes/pdf_out" /transtype:pdf3 /ditaext:xml /indexshow:no /artlbl:no /draft:no /fooutputrellinks:no /logdir:C:/DOCUME~1/sgalaba/LOCALS~1/Temp/XMetaL/RENDIT~1/log /tempdir:C:/DOCUME~1/sgalaba/APPLIC~1/SoftQuad/XMETAL~1/DITA_OT/temp </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set FRM_ANT_PARAM_ALL= </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set COMMAND_LINE_PARAM_ALL= </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;set ANT_PARAM_ALL= -Ddita.temp.dir=C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\temp -Ddita.dir=C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT -Dgenerate.copy.outer="3" -Dargs.distiller.exe="C:\progra~1\adobe\acroba~1\acrobat\acrodist.exe" -Dargs.logdir=C:\DOCUME~1\sgalaba\LOCALS~1\Temp\XMetaL\RENDIT~1\log -Ddita.extname=xml -Dargs.indexshow=no -Dargs.artlbl=no -Dargs.draft=no -Dargs.fo.output.rel.links=no </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;IF /I EXIST "" (</log_line><log_line>
echo *********** File content :   </log_line><log_line>
TYPE ""  </log_line><log_line>
echo *********************************************************************** </log_line><log_line>
) </log_line><log_line>
</log_line><log_line>
C:\Program Files\XMetaL 6.0\Author&gt;pushd  "C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT" </log_line><log_line>
</log_line><log_line>
C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT&gt;set DITA_IN_FILE=c:/documents and settings/sgalaba/my documents/xmetal/cub application notes/WebBrowserCertificateInstallation_MAP001.ditamap </log_line><log_line>
</log_line><log_line>
C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT&gt;IF "" == "" (SET CUSTOMIZATION_DIR= )  ELSE (SET CUSTOMIZATION_DIR=-Dcustomization.dir="" ) </log_line><log_line>
</log_line><log_line>
C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT&gt;IF "no" == "yes" (SET RDEBUG=-d )  ELSE (SET RDEBUG= ) </log_line><log_line>
</log_line><log_line>
C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT&gt;call ant  dita2pdf3  -Dargs.input="c:/documents and settings/sgalaba/my documents/xmetal/cub application notes/WebBrowserCertificateInstallation_MAP001.ditamap" -Doutput.dir="C:\Documents and Settings\sgalaba\My Documents\XMetaL\CUB Application Notes\pdf_out"     -Dargs.xmfo.formtter=distiller  -Ddita.temp.dir=C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\temp -Ddita.dir=C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT -Dgenerate.copy.outer="3" -Dargs.distiller.exe="C:\progra~1\adobe\acroba~1\acrobat\acrodist.exe" -Dargs.logdir=C:\DOCUME~1\sgalaba\LOCALS~1\Temp\XMetaL\RENDIT~1\log -Ddita.extname=xml -Dargs.indexshow=no -Dargs.artlbl=no -Dargs.draft=no -Dargs.fo.output.rel.links=no  </log_line><log_line>
Buildfile: build.xml</log_line><log_line>
</log_line><log_line>
start-process:</log_line><log_line>
</log_line><log_line>
init-logger:</log_line><log_line>
</log_line><log_line>
use-init.envhhcdir:</log_line><log_line>
</log_line><log_line>
use-init.hhcdir:</log_line><log_line>
</log_line><log_line>
use-init:</log_line><log_line>
</log_line><log_line>
check-arg:</log_line><log_line>
[echo] *****************************************************************</log_line><log_line>
[echo] * basedir = C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT</log_line><log_line>
[echo] * dita.dir = C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT</log_line><log_line>
[echo] * input = c:/documents and settings/sgalaba/my documents/xmetal/cub application notes/WebBrowserCertificateInstallation_MAP001.ditamap</log_line><log_line>
[echo] * transtype = xhtml</log_line><log_line>
[echo] * tempdir = C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\temp</log_line><log_line>
[echo] * outputdir = C:\Documents and Settings\sgalaba\My Documents\XMetaL\CUB Application Notes\pdf_out</log_line><log_line>
[echo] * extname = .xml</log_line><log_line>
[echo] * clean.temp = ${clean.temp}</log_line><log_line>
[echo] * xslt.parser = XALAN</log_line><log_line>
[echo] *****************************************************************</log_line><log_line>
</log_line><log_line>
output-deprecated-msg:</log_line><log_line>
</log_line><log_line>
output-css-warn-message:</log_line><log_line>
</log_line><log_line>
start-preprocess:</log_line><log_line>
</log_line><log_line>
clean-temp:</log_line><log_line>
[delete] Deleting 6 files from C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\temp</log_line><log_line>
</log_line><log_line>
gen-list-without-flagging:</log_line><log_line>
[pipeline] Using XERCES.</log_line><log_line>
[pipeline] [DOTJ037W][WARN] The XML schema and DTD validition function of the parser is turned off. Please make sure the input is normalized DITA files with class attributes,otherwise it would cause confusing log information.</log_line><log_line>
</log_line><log_line>
gen-list-with-flagging:</log_line><log_line>
</log_line><log_line>
gen-list:</log_line><log_line>
</log_line><log_line>
debug:</log_line><log_line>
</log_line><log_line>
debug-and-filter:</log_line><log_line>
</log_line><log_line>
debug-filter:</log_line><log_line>
</log_line><log_line>
xm_reviewer-preprocess:</log_line><log_line>
</log_line><log_line>
copy-image:</log_line><log_line>
</log_line><log_line>
copy-html:</log_line><log_line>
</log_line><log_line>
copy-flag:</log_line><log_line>
</log_line><log_line>
copy-subsidiary:</log_line><log_line>
</log_line><log_line>
copy-generated-files:</log_line><log_line>
[copy] Copying 2 files to C:\DOCUME~1\sgalaba\LOCALS~1\Temp\XMetaL\RENDIT~1\log</log_line><log_line>
</log_line><log_line>
copy-files:</log_line><log_line>
</log_line><log_line>
conref:</log_line><log_line>
</log_line><log_line>
move-meta-entries:</log_line><log_line>
</log_line><log_line>
mapref:</log_line><log_line>
[xslt] Transforming into C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\temp</log_line><log_line>
[xslt] Processing C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\temp\WebBrowserCertificateInstallation_MAP001.ditamap to C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\temp\WebBrowserCertificateInstallation_MAP001.ditamap.ref</log_line><log_line>
[xslt] Loading stylesheet C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\xsl\preprocess\mapref.xsl</log_line><log_line>
Moving 1 file to C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\temp</log_line><log_line>
</log_line><log_line>
mappull:</log_line><log_line>
[xslt] Transforming into C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\temp</log_line><log_line>
[xslt] Processing C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\temp\WebBrowserCertificateInstallation_MAP001.ditamap to C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\temp\WebBrowserCertificateInstallation_MAP001.ditamap.pull</log_line><log_line>
[xslt] Loading stylesheet C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\xsl\preprocess\mappull.xsl</log_line><log_line>
Moving 1 file to C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\temp</log_line><log_line>
</log_line><log_line>
chunk:</log_line><log_line>
</log_line><log_line>
maplink:</log_line><log_line>
[xslt] Processing C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\temp\WebBrowserCertificateInstallation_MAP001.ditamap to C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\temp\maplinks.unordered</log_line><log_line>
[xslt] Loading stylesheet C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\xsl\preprocess\maplink.xsl</log_line><log_line>
</log_line><log_line>
move-links:</log_line><log_line>
</log_line><log_line>
topicpull:</log_line><log_line>
[xslt] Transforming into C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\temp</log_line><log_line>
[xslt] Processing C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\temp\CertificateInstallationProcedure_ts001.xml to C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\temp\CertificateInstallationProcedure_ts001.xml.pull</log_line><log_line>
[xslt] Loading stylesheet C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\xsl\preprocess\topicpull.xsl</log_line><log_line>
[xslt] Processing C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\temp\WebBrowserCertificateInstallation_con001.xml to C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\temp\WebBrowserCertificateInstallation_con001.xml.pull</log_line><log_line>
Moving 2 files to C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\temp</log_line><log_line>
</log_line><log_line>
bookmap-preprocess:</log_line><log_line>
[echo] bookmap-preprocess started</log_line><log_line>
[echo] bookmap-preprocess finished</log_line><log_line>
</log_line><log_line>
preprocess:</log_line><log_line>
</log_line><log_line>
dita-preprocess:</log_line><log_line>
</log_line><log_line>
map2pdf3:</log_line><log_line>
[echo] map2pdf3 topicmerge ...</log_line><log_line>
[echo] inputmap = C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\temp\WebBrowserCertificateInstallation_MAP001.ditamap</log_line><log_line>
[echo] extparam = output=C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\temp\WebBrowserCertificateInstallation_MAP001_MERGED.xml;style=C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT/demo/xmfo/xsl/common/topicmerge.xsl</log_line><log_line>
[echo] map2pdf3 topicmerge end </log_line><log_line>
</log_line><log_line>
publish.map.xmpdf:</log_line><log_line>
[echo] publish.map.xmpdf start</log_line><log_line>
</log_line><log_line>
transform.topic2xmpdf:</log_line><log_line>
[echo] transform.topic2xmpdf start</log_line><log_line>
[echo] taskdef... dita-version</log_line><log_line>
[dita-version] Search finished</log_line><log_line>
[echo] dita-version = 1.1</log_line><log_line>
[echo] document.locale = en_US</log_line><log_line>
</log_line><log_line>
copyCoreArtwork:</log_line><log_line>
</log_line><log_line>
transform.topic2xmfo:</log_line><log_line>
[echo] transform.topic2xmfo started</log_line><log_line>
[echo] taskdef... index-preprocess</log_line><log_line>
[echo] taskdef... i18n-preprocess</log_line><log_line>
[echo] index-preprocess started</log_line><log_line>
[echo] index-preprocess OK</log_line><log_line>
[echo] C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\temp/stage2.fo Started</log_line><log_line>
[java] [XM] $xmConfigAttrs (from fo/attrs/xm_baseline_attrs.xsl) :</log_line><log_line>
[java] .....xm-cfg/commons-attr.xsl</log_line><log_line>
[java] .....xm-cfg/front-matter-attr.xsl</log_line><log_line>
[java] .....xm-cfg/hi-domain-attr.xsl</log_line><log_line>
[java] .....xm-cfg/index-attr.xsl</log_line><log_line>
[java] .....xm-cfg/links-attr.xsl</log_line><log_line>
[java] .....xm-cfg/lists-attr.xsl</log_line><log_line>
[java] .....xm-cfg/pr-domain-attr.xsl</log_line><log_line>
[java] .....xm-cfg/static-content-attr.xsl</log_line><log_line>
[java] .....xm-cfg/sw-domain-attr.xsl</log_line><log_line>
[java] .....xm-cfg/tables-attr.xsl</log_line><log_line>
[java] .....xm-cfg/toc-attr.xsl</log_line><log_line>
[java] .....xm-cfg/ui-domain-attr.xsl</log_line><log_line>
[java] .....xm-cfg/glossary-attr.xsl</log_line><log_line>
[java] [XM] layout masters override</log_line><log_line>
[java] .....xm.paper.type: letter</log_line><log_line>
[java] .....xm.page.height: 11in</log_line><log_line>
[java] .....xm.page.width: 8.5in</log_line><log_line>
[java] .....xm.page.margin.bottom: 1in</log_line><log_line>
[java] .....xm.page.margin.top: 1in</log_line><log_line>
[java] .....xm.page.margin.inner: 0.75in</log_line><log_line>
[java] .....xm.page.margin.outer: 1.25in</log_line><log_line>
[java] .....xm.page.margin.inner: 0.75in</log_line><log_line>
[java] .....xm.page.margin.outer: 1.25in</log_line><log_line>
[java] [CJ] xm_determineTopicType for concept</log_line><log_line>
[java] [CJ] $mapTopicParenClass:  </log_line><log_line>
[java] [CJ] xm_determineTopicType for task</log_line><log_line>
[java] [CJ] $mapTopicParenClass:  </log_line><log_line>
[java] [CJ] xm_determineTopicType for concept</log_line><log_line>
[java] [CJ] $mapTopicParenClass:  </log_line><log_line>
[java] [CJ] xm_determineTopicType for title</log_line><log_line>
[java] [CJ] $mapTopicParenClass:  </log_line><log_line>
[java] [XM] js_attr_set_reflection_mod - using topic.titlefrom $xmConfigAttrs</log_line><log_line>
[java] [XM] hit variable in attr overrides</log_line><log_line>
[java] [XM] js_attr_set_reflection_mod - using topic.title__contentfrom $xmConfigAttrs</log_line><log_line>
[java] [CJ] xm_determineTopicType for shortdesc</log_line><log_line>
[java] [CJ] $mapTopicParenClass:  </log_line><log_line>
[java] [CJ] xm_determineTopicType for task</log_line><log_line>
[java] [CJ] $mapTopicParenClass:  </log_line><log_line>
[java] [CJ] xm_determineTopicType for title</log_line><log_line>
[java] [CJ] $mapTopicParenClass:  </log_line><log_line>
[java] [XM] js_attr_set_reflection_mod - using topic.titlefrom $xmConfigAttrs</log_line><log_line>
[java] [XM] hit variable in attr overrides</log_line><log_line>
[java] [XM] js_attr_set_reflection_mod - using topic.title__contentfrom $xmConfigAttrs</log_line><log_line>
[java] [CJ] xm_determineTopicType for shortdesc</log_line><log_line>
[java] [CJ] $mapTopicParenClass:  </log_line><log_line>
[echo] C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\temp/stage2.fo OK</log_line><log_line>
[echo] i18n-preprocess OK</log_line><log_line>
Moving 1 file to C:\Documents and Settings\sgalaba\My Documents\XMetaL\CUB Application Notes\pdf_out</log_line><log_line>
[echo] C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\temp/stage3.fo OK</log_line><log_line>
</log_line><log_line>
transform.fo2xmpdf:</log_line><log_line>
[echo] transform.fo2xmpdf start</log_line><log_line>
</log_line><log_line>
transform.fo2xmpdf.xep:</log_line><log_line>
</log_line><log_line>
transform.fo2xmpdf.fop:</log_line><log_line>
</log_line><log_line>
transform.fo2xmpdf.antenna:</log_line><log_line>
</log_line><log_line>
transform.fo2xmpdf.distiller:</log_line><log_line>
[echo] transform.fo2xmpdf.distiller start</log_line><log_line>
</log_line><log_line>
[exec] C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\demo\xmfo&gt;echo on </log_line><log_line>
</log_line><log_line>
[exec] C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\demo\xmfo&gt;SET XMETAL_SHARED_GEN=C:\PROGRA~1\COMMON~1\XMETAL~1 </log_line><log_line>
</log_line><log_line>
[exec] C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT\demo\xmfo&gt;SET PER_USER_XMETAL_SHARED_GEN=C:\Documents and Settings\sgalaba\Application Data\SoftQuad\XMetaL Shared </log_line><log_line>
[exec] (document [system-id file:/C:/Documents and Settings/sgalaba/My Documents/XMetaL/CUB Application Notes/pdf_out/topic.fo]</log_line><log_line>
[exec]   (validate [validation OK])</log_line><log_line>
[exec]   (compile </log_line><log_line>
[exec]     (masters </log_line><log_line>
[exec]       (sequence-master [master-name front-matter-first])</log_line><log_line>
[exec]       (sequence-master [master-name front-matter-last])</log_line><log_line>
[exec]       (sequence-master [master-name front-matter-even])</log_line><log_line>
[exec]       (sequence-master [master-name front-matter-odd])</log_line><log_line>
[exec]       (sequence-master [master-name toc-even])</log_line><log_line>
[exec]       (sequence-master [master-name toc-odd])</log_line><log_line>
[exec]       (sequence-master [master-name toc-last])</log_line><log_line>
[exec]       (sequence-master [master-name toc-first])</log_line><log_line>
[exec]       (sequence-master [master-name body-first])</log_line><log_line>
[exec]       (sequence-master [master-name body-even])</log_line><log_line>
[exec]       (sequence-master [master-name body-odd])</log_line><log_line>
[exec]       (sequence-master [master-name body-last])</log_line><log_line>
[exec]       (sequence-master [master-name index-first])</log_line><log_line>
[exec]       (sequence-master [master-name index-even])</log_line><log_line>
[exec]       (sequence-master [master-name index-odd])</log_line><log_line>
[exec]       (sequence-master [master-name index-last])</log_line><log_line>
[exec]       (sequence-master [master-name toc-sequence])</log_line><log_line>
[exec]       (sequence-master [master-name body-sequence])</log_line><log_line>
[exec]       (sequence-master [master-name ditamap-body-sequence])</log_line><log_line>
[exec]       (sequence-master [master-name index-sequence])</log_line><log_line>
[exec]       (sequence-master [master-name front-matter]))</log_line><log_line>
[exec]     (outline )</log_line><log_line>
[exec]     (sequence [master-reference front-matter]</log_line><log_line>
[exec]       (flow [flow-name xsl-region-body]))</log_line><log_line>
[exec]     (sequence [master-reference toc-sequence]</log_line><log_line>
[exec]       (static-content [flow-name first-toc-header])</log_line><log_line>
[exec]       (static-content [flow-name odd-toc-footer])</log_line><log_line>
[exec]       (static-content [flow-name even-toc-footer])</log_line><log_line>
[exec]       (static-content [flow-name first-toc-footer])</log_line><log_line>
[exec]       (static-content [flow-name last-toc-footer])</log_line><log_line>
[exec]       (static-content [flow-name odd-toc-header])</log_line><log_line>
[exec]       (static-content [flow-name even-toc-header])</log_line><log_line>
[exec]       (static-content [flow-name last-toc-header])</log_line><log_line>
[exec]       (flow [flow-name xsl-region-body]))</log_line><log_line>
[exec]     (sequence [master-reference ditamap-body-sequence]</log_line><log_line>
[exec]       (static-content [flow-name xsl-footnote-separator])</log_line><log_line>
[exec]       (static-content [flow-name odd-body-footer])</log_line><log_line>
[exec]       (static-content [flow-name even-body-footer])</log_line><log_line>
[exec]       (static-content [flow-name odd-body-header])</log_line><log_line>
[exec]       (static-content [flow-name even-body-header])</log_line><log_line>
[exec]       (static-content [flow-name first-body-header])</log_line><log_line>
[exec]       (static-content [flow-name first-body-footer])</log_line><log_line>
[exec]       (static-content [flow-name last-body-header])</log_line><log_line>
[exec]       (static-content [flow-name last-body-footer])</log_line><log_line>
[exec]       (flow [flow-name xsl-region-body]))</log_line><log_line>
[exec]     (sequence [master-reference ditamap-body-sequence]</log_line><log_line>
[exec]       (static-content [flow-name xsl-footnote-separator])</log_line><log_line>
[exec]       (static-content [flow-name odd-body-footer])</log_line><log_line>
[exec]       (static-content [flow-name even-body-footer])</log_line><log_line>
[exec]       (static-content [flow-name odd-body-header])</log_line><log_line>
[exec]       (static-content [flow-name even-body-header])</log_line><log_line>
[exec]       (static-content [flow-name first-body-header])</log_line><log_line>
[exec]       (static-content [flow-name first-body-footer])</log_line><log_line>
[exec]       (static-content [flow-name last-body-header])</log_line><log_line>
[exec]       (static-content [flow-name last-body-footer])</log_line><log_line>
[exec]       (flow [flow-name xsl-region-body])))</log_line><log_line>
[exec]   (format </log_line><log_line>
[exec]     (sequence [master-reference front-matter]</log_line><log_line>
[exec]       (flow [1])</log_line><log_line>
[exec]       (static-content [1]))</log_line><log_line>
[exec]     (sequence [master-reference toc-sequence]</log_line><log_line>
[exec]       (flow [ii])</log_line><log_line>
[exec]       (static-content [ii]|even-toc-footer||even-toc-header|))</log_line><log_line>
[exec]     (sequence [master-reference ditamap-body-sequence]</log_line><log_line>
[exec]       (flow [3])</log_line><log_line>
[exec]       (static-content [3]|odd-body-footer||odd-body-header|))</log_line><log_line>
[exec]     (sequence [master-reference ditamap-body-sequence]</log_line><log_line>
[exec]       (flow [4])</log_line><log_line>
[exec]       (static-content [4]|even-body-footer||even-body-header|)))</log_line><log_line>
[exec]   (generate [output-format ps][1][ii][3][4]))</log_line><log_line>
[echo] content of C:\DOCUME~1\sgalaba\LOCALS~1\Temp\XMetaL\RENDIT~1\log\set_ps_src.bat:</log_line><log_line>
[echo] SET PS_FILE=C:\Documents and Settings\sgalaba\My Documents\XMetaL\CUB Application Notes\pdf_out\topic.ps</log_line><log_line>
[echo] SET DISTILLER_EXE=C:\progra~1\adobe\acroba~1\acrobat\acrodist.exe</log_line><log_line>
[echo] .....</log_line><log_line>
[echo] transform.fo2xmpdf.distiller end</log_line><log_line>
[echo] transform.fo2xmpdf end</log_line><log_line>
[echo] transform.topic2xmpdf end</log_line><log_line>
[echo] publish.map.xmpdf end</log_line><log_line>
</log_line><log_line>
topic2pdf3:</log_line><log_line>
</log_line><log_line>
dita2pdf3:</log_line><log_line>
</log_line><log_line>
BUILD SUCCESSFUL</log_line><log_line>
Total time: 6 seconds</log_line><log_line>
</log_line><log_line>
C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT&gt;call C:\DOCUME~1\sgalaba\LOCALS~1\Temp\XMetaL\RENDIT~1\log\set_ps_src.bat </log_line><log_line>
</log_line><log_line>
C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT&gt;SET PS_FILE=C:\Documents and Settings\sgalaba\My Documents\XMetaL\CUB Application Notes\pdf_out\topic.ps </log_line><log_line>
</log_line><log_line>
C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT&gt;SET DISTILLER_EXE=C:\progra~1\adobe\acroba~1\acrobat\acrodist.exe </log_line><log_line>
and was unexpected at this time.</log_line><log_line>
C:\DOCUME~1\sgalaba\APPLIC~1\SoftQuad\XMETAL~1\DITA_OT&gt;IF "-n -j "C:\Documents and Settings\All Users\Application Data\Adobe\Adobe PDF\Settings\standard.joboptions"" == "" (</log_line>
« Last Edit: August 19, 2011, 10:46:09 AM by twisted » Logged
Derek Read
Program Manager (XMetaL)
Administrator
Member

Posts: 1548



WWW
« Reply #3 on: August 29, 2011, 12:12:52 PM »
Using the proper 8.3 file path to acrodist.exe resolved this client's issue (contacted us via XMetaL Support).
Logged
ken_txvia
Member

Posts: 2
« Reply #4 on: January 17, 2012, 01:57:19 PM »
how do you set the path to acrodist? am having the same problem after the same troubleshooting steps (was able to create PDFs previously, but cannot now)
Logged
ken_txvia
Member

Posts: 2
« Reply #5 on: January 17, 2012, 02:07:57 PM »
6.0.2.070
Logged
Pages: 1
Print
« previous next »
Jump to: